Configuration > Igmp Snooping > Host Table; Configuration > Igmp Snooping > Ip Multicast Profile Settings; Configuration > Igmp Snooping > Limited Multicast Range Settings - D-Link DGS-1210/ME User Manual

4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
IPv4 Replace Source: This field is used to replace the source IPv4 address of incoming packets sent by the
host before being forwarded to the source port.
IPv6 Replace Source IP: This field is used to replace the source IPv6 address of incoming packets sent by
the host before being forwarded to the source port.
Source Ports: Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be the
tagged members of the multicast VLAN.
Click Add to add the ISM VLAN which will appear in the table, or click Clear All to clear all fields.
Click Edit button to modify the parameters and update the ISM VLAN Setting or click Delete to delete the
ISM VLAN.
Click View to display the detail information of ISM VLAN.
Figure 4.73 - Configuration > IGMP Snooping > ISM VLAN Settings
Configuration > IGMP Snooping > Host Table
The Host Table page displays the information of Host Table. Including VLAN ID, Group, Port Number and
Host IP.
Figure 4.67 - Configuration > IGMP Snooping > Host Table
Configuration > IGMP Snooping > IP Multicast Profile Settings
The IP Multicast Profile Settings page allows user to configure the IP Multicast Profile.
Figure 4.74 - Configuration > IGMP Snooping > IP Multicast Profile Settings
Profile ID: Specify the Profile ID.
Profile Name: Specify the Profile Name.
Click Add to create a new IP Multicast Profile or click Delete All to clear all the entries.
Configuration > IGMP Snooping > Limited Multicast Range Settings
The Limited Multicast Range Settings page allows user to configure the Limited Multicast. Specify the port
range, select Access IP Type is IPv4 or IPv6 and select the Access is Deny or Permit then click Apply to
implement changes made.
42