D-Link License Management System (Dlms) Commands - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
29. D-Link License Management System (DLMS)
Commands
29-1 install dlms activation-code
This command is used to install an activation code on the switch.
install dlms activation-code AC-STR [unit UNIT-ID]
Parameters
AC-STR
UNIT-ID
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
The license specifies the feature options that are enabled on the switch. License keys are sold in the
market. It may be printed on a physical package or be displayed in an e-mail or a portal. The user needs
register the license key on the Global Registration Portal to get the activation code. Install the proper
activation code rather than license key to activate/unlock some features.
This command is used to install the activation code. After the activation code was installed successfully,
reboot the switch to activate the license.
Example
This example shows how to install a legal activation code.
Switch# install dlms activation-code xBc7vNWsSpchuQkGZsTfPwcfa
Success.
Please reboot the device to activate the license.
Switch#
This example shows an activation code that is illegal.
Switch# install dlms activation-code xBc7vNWsSpchuQkGZsTfPwAcb
ERROR: Illegal activation code.
Switch#
Specifies the activation code. The length should be 25 characters.
(Optional) Specifies the unit ID of the switch in the switch stack. When
the unit ID is not specified, the activation code will be installed on the
current switch.
422