Ip Source Binding; Ip Source Guard Command In The Interface Mode - D-Link DES-7200 Cli Reference Manual

Chapter 52 IP Source Guard Configuration Commands
Examples
Related
commands

52.2 IP Source Guard Command in the Interface Mode

In the interface configuration mode, the command of IP Source Guard is:
ip verify source
52.2.1 ip verify source
Use this command to enable IP Source Guard function on the interface, The no form of this
command disable the function.
[no] ip verify source [port-security]
Parameter
description
Default
configuration
Command
mode
52-2
The following example shows how to configure a static user:
DES-7210# configure terminal
DES-7210(config)# ip
192.168.4.243 interface fastEthernet 0/1
DES-7210(config)# end
DES-7210# show ip source binding
MacAddress IpAddress Lease(sec) Type VLAN
------------------ ---------------
----- --------------------
00d0.f801.0101 192.168.4.243 infinite
0/1 Total number of bindings: 1
Command
show ip source
binding
Parameter
port-security
Disabled
Interface configuration mode.
DES-7200 CLI Reference Guide
source binding 00d0.f801.0101
------------
static
Description
View the binding information of IP source
address and database.
Description
Configure IP Source
IP+MAC-based detection.
vlan 1
Interface
-------------
1 FastEthernet
Guard to do