Inter-Tel AXXESS Manual page 68

Overview
® ®
INTER-TEL AXXESS
•
•
H. ADMINISTRATOR FEATURES
•
•
•
•
•
•
•
•
•
•
•
I. ATTENDANT CONSOLE FEATURES
NOTE:
ning version 7.0 or later, Attendant Console version 3.0 is required.
•
•
•
•
•
•
Page 1-30
MANUAL VERSION 11.0 – May 2008
Recall destination for unanswered calls
Immediate off-hook voice announce (OHVA) calls (requires special programming and a
DSS/BLF Unit or an Executive Display, Professional Display, Standard Display, Asso-
ciate Display, Model 8520, or Model 8560 Phone with assigned DSS/BLF buttons)
NOTE:
The Associated and Professional Display Phones are supported by U.S. soft-
ware only.
Place the local node or other nodes in the network in night mode or day mode
Set the date and time of the local node
Set the network date and time and re-synchronize clocks in the network.
Make database changes (see
Program system speed-dial numbers on the local node
Receive and clear displayed system and network alarms
Use diagnostic mode features:
— Freeze and unfreeze database history on local nodes or other nodes in the system
using freeze "zones"
— Print error logs
— Seize specific devices for troubleshooting purposes
Use Diagnostic - dump node information feature code
Swap extensions without accessing DB Programming
Enable/disable the modem on the CPC
Reset the modem on the CPC
Versions 7.0 and later software does not support Attendant Console version 2.0. If run-
Designed for use with Microsoft Windows operating system software
Quick, simple call answering and transfer
Visual display of system call activity, system directories, system alarms, date and time,
etc.
Automatic call priority
Optional headset operation
Swap extension feature
NOTE:
See page 2-83 for additional information.
page 5-276 for a list of programming areas)
Administrator Features