Inter-Tel AXXESS Manual page 817

The display shows ENTER DATABASE OPTION. (Executive Display, Professional
3.
Display, and Model 8560 Phones also show the options: STATION, SYSTEM, and
TRUNK.) Press
OPTION.
Program an Individual Trunk: Press
4.
Then program trunk options as follows:
a.
b.
a.
Trunk Groups
®
INTER-TEL AXXESS
or the
TRUNK
3
The display shows ENTER TRUNK EXTENSION. Enter the extension number of
the trunk to be programmed using one of the methods described in
52.36.
The display shows INDIVIDUAL TRUNK OPTION. Enter one of the following
options. To view the last two options on an Executive Display, Professional Dis-
play, or Model 8560 Phone, press the arrow (<< or >>) menu button at the bottom
of the display.
Answer Supervision: To program the answer supervision for the trunk, press
or the menu button. When the display shows ANS SUPER-
ANS SUPERVISION
VISION OPTION, press
1
polarity-reversal supervision type. Or, press
for Valid Call timer supervision. Or, press
button for Valid Call timer with Polarity Reversal supervision. Then press
to continue.
ACCEPT
Caller ID [CLIP]: To enable or disable Caller ID [CLIP], press
menu button. When the display shows SET CALLER ID, press
CALLER ID
ON to enable the feature, or press
to continue.
ACCEPT
Hybrid Balance: To set the hybrid balance of the trunk to normal or short, press
or the
HYBRID BALANCE
3
BALANCE OPTION, press
menu button. Then press
SHORT
DTMF/Dial-Pulse Signaling: To set the trunk for DTMF or dial-pulse signaling,
press or the
SIGNALING
4
NALING OPTION, press
menu button. Then press
PULSE
Trunk Group Number: To assign the trunk to a trunk group, press
menu button. When the display shows ENTER TRUNK GRP
TRUNK GROUP
EXTENSION, enter the desired trunk group number using one of the methods
described in paragraph 52.36.
Busy Trunk: To temporarily remove the trunk from service, press
menu button. When the display shows MARK TRUNK BUSY, press
TRUNK
or the menu button, or press
ON
to continue.
ACCEPT
To exit, press or
ACCEPT
#
reach the ENTER DATABASE OPTION prompt.
®
MANUAL VERSION 11.0 – May 2008
menu button. The display shows ENTER TRUNK
or the
INDIVIDUAL TRUNK
1
or the
POLARITY REVERSE
or the
VALID CALL
2
or the
VALID + POLARITY
3
or OFF to disable it. Then press
2
menu button. When the display shows HYBRID
or the menu button, or press
NORMAL
1
or to continue.
ACCEPT
#
menu button. When the display shows ENTER SIG-
or the menu button, or press
DTMF
1
or to continue.
ACCEPT
#
or the menu button. Then press
OFF
2
to move backward through the prompts until you
System Features
menu button.
paragraph
1
menu button for the
menu button
menu
or
#
or the
2
or
1
or
#
or the
2
or the
2
or the
5
or the
BUSY
6
1
or
#
Page 5-291
5