Keystroke Summary - Inter-Tel AXXESS Manual

•
Selecting From A Drop-Down List: Move the programming focus to the list box, as
described above for changing a flag. Then, with the programming focus on the box,
press
current Value. Then, you can use the up and down arrow keys to increment or decre-
ment the value. You can also type in a value directly. When the desired value is shown,
press
low these steps to practice using drop-down lists:
a.
b.

Keystroke Summary

TABLE 6-13:
TAB
SHIFT+TAB
ALT+TAB
Left or Right Arrow
Up or Down Arrow
SPACE BAR
ENTER
CTRL+ENTER
ESC
Keystroke Summary
INTER-TEL
to select this area to program. The box will "open up" and highlight its
ENTER
. An example of drop down lists is the Cabinets programming folder. Fol-
ENTER
Press (double-click) to open the Cabinets programming. The high-
CTRL+ENTER
light will move to the left side of the screen. Use Tab to move it back to the right
and use the down arrow to select the first card slot (01:01).
Press (single click) to open the drop-down list for this card slot. You can
ENTER
now program the card for the slot using one of the three following methods:
Use the arrow keys to scroll through the entries in the list. Only one entry
will display. When you have the desired value in the box, press
Press
ALT+Down Arrow
box will show all possibilities with the current choice highlighted. You can
use the up and down arrow keys to select the value desired. When you have
done so, press
ENTER
you would like to collapse the box without changing the selection you can
press (highlight removed) or press
ESC
Press the first letter of the device type you want to specify. In other words, if
you want to specify a "Loop Start Card," press
the L key will rotate through the choices beginning with the letter L.
Keystroke Summary
Key
Moves the highlight between left and right pane or between drop-
down path box (immediately below Menu Bar) and the left pane.
Switches between open programs in Windows.
Moves programming focus to left or right.
Moves programming focus up or down. Scrolls up or down in drop
down list boxes.
Changes status of a flag when the flag is selected for programming.
Equivalent to a single click. Also used to accept a highlighted item in
a drop-down list box.
Equivalent to a double-click.
When programming an item, it restores the original value (no change
made) and removes focus from that item. If a drop-down list box is
open, it closes the box with no change.
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
to show the entire list of choices. The drop-down
. This will collapse the box with your value selected. If
ALT+Up Arrow
L
Action
Programming
.
ENTER
(highlight remains).
. Each subsequent press of
Page 6-63
6