Inter-Tel AXXESS Manual page 764

System Features
® ®
INTER-TEL AXXESS
3.
4.
38.22 To program station speed-dial numbers at a non-display phone:
NOTE:
remains unchanged. Or, use the MUTE button to backspace.
1.
2.
3.
4.
38.23 To program station speed-dial numbers at a single-line set:
NOTE:
unchanged.
1.
2.
Page 5-238
MANUAL VERSION 11.0 – May 2008
When the display shows ENTER NUMBER, do one of the following:
•
To enter or change a number: Dial the extension number or telephone number
(up to 16 digits, including pauses and hookflashes/recalls) to be stored. To include
*, #, a hookflash/recall, or a pause in the number, press
for an asterisk (*), twice for a pound [hash] (#), three times for a hookflash
(recall), or four times for a pause. You can enter more than one *, #, or hookflash
(recall) in a row by pressing the
necessary after pauses). If you make a mistake, press
or press or
CANCEL
•
To erase an existing number and leave it blank: Press
is erased.
Press to exit. Repeat these steps for each additional number to be stored.
#
If you make a mistake, press
While on hook, enter the Program Station Speed Dial feature code (383).
Press the speed-dial button to be programmed or dial the desired speed-dial location
code (0-9). If you hear reorder tones, you entered an invalid speed dial location code;
try again.
Do one of the following:
To enter or change a number: Dial the extension number or telephone number
(up to 16 digits, including pauses and hookflashes/recalls) to be stored. To include
*, #, a hookflash (recall), or a pause in the number, press
for an asterisk (*), twice for a pound [hash] (#), three times for a hookflash
(recall), or four times for a pause. You can enter more than one *, #, or hookflash
(recall) in a row by pressing the
necessary after pauses). If you make a mistake, press
or press or
CANCEL
To erase an existing number and leave it blank: press
is erased.
Press to exit. Repeat these steps for each additional number to be stored.
#
If you make a mistake, press
Lift the handset and enter the Program Station Speed-Dial feature code (383). You hear
a confirmation tone.
Dial the desired speed-dial location code (0-9). If you hear reorder tones, you entered
an invalid speed dial location code; try again.
button to move to the next character (not
FWD
to leave the number unchanged; then start over at step 1.
or CANCEL; then start over. The number in memory
button to move to the next character (not
FWD
to leave the number unchanged; then start over at step 1.
; then start over. The number in memory remains
Programming Station Speed-Dial Numbers and Names
∞
or once
SPCL
to back up and erase,
MUTE
until the number
MUTE
∞
or once
SPCL
to back up and erase,
MUTE
until the number
MUTE