Export/Import Devices - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

14. EXPORT/IMPORT DEVICES

cessing Unit connected to the System, make sure you disable this flag before you attempt to

import or export information over the network.

14.1 When another node adds a new extension or changes an existing extension, username,

or description, the network broadcasts the new extension information to the other nodes in the

network. Or, programmers can choose to export local device information to other nodes, or

import devices from the other nodes to the local node, using the Export/Import option in this

menu. If there is a conflicting (duplicate) extension in a broadcast from another node, the

receiving node ignores the new extension in favor of its existing extension number.

14.2 If the network is unable to export or import an extension to a node (automatically or

using the Export/Import feature) because there is an active programming session on that node,

the node is unable to communicate with its Voice Processor port, the node is down, or the links

to the node are down, the new extension will not be added to or changed on that node. (If Mes-

sage Print is enabled, error messages will indicate any unsuccessful broadcasts.) You must

manually add or change the new extension in the node's database or try to export or import it

later. You may want to check each node to verify that their off-node device lists are pro-

grammed properly to allow access between the nodes.

cally broadcast to other nodes, until they are modified. They must be exported or imported using

the Export/Import option or programmed manually at each of the other nodes. Also, each node

can have only 8000 off-node device entries in its database. After that limit has been reached,

new devices received through network broadcasts cannot be added to the node's database.

14.3 To export or import devices, select

The following window appears.

The Voice Processor Enable flag is enabled by default. If you do not have a Voice Pro-

Extension numbers that exist before the network is established will not be automati-

You must have a programmed Node to export information to or import information from

MANUAL VERSION 11.0 – May 2008

Export/Import Devices

from the Operations menu.

Table of Contents