Programming Overview; Programming Overview; Introduction; Plan The Programming Session - Inter-Tel AXXESS Manual

PROGRAMMING OVERVIEW

1. INTRODUCTION

1.1 This section of the manual explains how to program the system. The Axxess
functional when defaulted and only requires programming to make changes to meet the cus-
tomer's special needs.
NOTE:
A. PLAN THE PROGRAMMING SESSION
1.2 Determine the features that need to be programmed to meet the customer's needs. Then
refer to the specific programs and program planning sheets. For example, if the customer wants
to use the hunt group feature, see the programming information on
sponding program planning sheet. Program planning sheets are included on the system soft-
ware CD-ROM, Documentation folder. You can also find all documentation on the Inter-Tel
edGe Web site. For readers located in Europe, contact the Inter-Tel Europe office for technical
documentation.
B. INITIAL PROGRAMMING GUIDELINES
1.3 When you first program an Inter-Tel
programming. (Detailed descriptions for these steps can be found throughout this chapter.)
With your programming PC connected to the serial port of the phone system, start the
1.
Session Manager.
Do the following:
2.
a.
b.
c.
Select
3.
plan. Also change any feature codes that conflict with extension numbers or that the
customer wants to change. (See
Change the home area codes (not applicable to Europe). (See
4.
Program the Voice Processor:
5.
a.
b.
c.

Introduction

INTER-TEL
Programmers must be certified on the Axxess system to receive technical support.
Select and then
System Software License
that the customer has purchased are enabled or available on the software license.
(See page 6-97.)
Select and then
System Cabinets,
system. (See page 6-107.) Delete any cards you will not be using.
Disable the Voice Processor port if you will not be needing it. (See
and assign your extension numbers, as determined by your numbering
Devices
Create a Message Notification/Retrieval application and a Voice Mail Application.
Make sure they have the correct extension numbers. (See
Create a System Administrator's mailbox for the station that will serve as the
Voice Mail administrator. You can come back later to program the rest of the mail-
boxes or you can do it now. (See
Assign the newly created System Administrator's mailbox as the System Adminis-
trator. (See page 6-345.)
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
®
system, follow these guidelines for the initial
. Then make sure the premium features
and program the cards that are installed in the
page 6-156.)
page 6-377.)
Programming
®
system is
page 6-160 and the corre-
page 6-107.)
page 6-286.)
page 6-369.)
Page 6-9
6