Inter-Tel AXXESS Manual page 725

•
Forced – Long-Distance Toll Calls Validated: Requires users to enter only an account
code if the system detects that a long distance call (a toll call outside of the local area
codes) has been dialed when ARS is used. If the code matches one of the pre-pro-
grammed forced account codes in the database, the call is allowed. If the code does not
match, the call is blocked. Stations with this account code type cannot forward calls to
outside telephone numbers.
•
Forced – Long-Distance Toll Calls Non-Validated: Requires users to enter only an
account code if the system detects that a long distance call (a toll call outside of the
local area codes) has been dialed when the ARS is used. The code is not checked
against any lists and the call is allowed as soon as the code is entered. Stations with this
account code type cannot forward calls to outside telephone numbers.
•
None: Does not require users to enter an account code. The user may still use optional
account codes or enable the Account Code For All Calls Following feature, as desired.
26.29 The account code types for Europe are:
•
Standard: Automatically appears in the SMDR printout to identify calls from this sta-
tion. The station user is not required to enter any digits during the call.
•
Forced – All Calls Validated: Requires users to enter a forced account code before an
outside call can be placed. If the code matches one of the pre-programmed forced
account codes in the database, the call is allowed. If the code does not match, the call is
blocked. Stations with this account code type cannot forward calls to outside tele-
phone numbers.
•
Forced – All Calls Non-Validated: Requires users to enter an account code before
placing an outside call. The code is not checked against any lists, and the call is allowed
as soon as the code is entered. Stations with this account code type cannot forward
calls to outside telephone numbers.
•
Forced – Toll (National) Calls Validated: Requires users to enter an account code
only if the system detects that a toll call has been dialed when ARS is used. If the code
matches one of the pre-programmed forced account codes in the database, the call is
allowed. If the code does not match, the call is blocked. Stations with this account code
type cannot forward calls to outside telephone numbers.
•
Forced – Toll (National) Calls Non-Validated: Requires users to enter an account
code only if the system detects that a toll call has been dialed when the ARS is used.
The code is not checked against any lists, and the call is allowed as soon as the code is
entered. Stations with this account code type cannot forward calls to outside telephone
numbers.
•
None: Does not require users to enter an account code. The user may still use optional
account codes or enable the Account Code For All Calls Following feature, as desired.
26.30 Station account code programming is explained on
26.31 If the Inter-Tel system is installed in a network, the network validates account codes
against the account code table on the same node as the caller. The account code follows the call
as it moves from node to node and appears on every SMDR record associated with the call.
However, if an optional account code is entered during the call, that account code will be used
in the SMDR report.
26.32 If ARS Dial Rule #5 – Echo Account Code [Dial Rule #4 in Europe] is enabled, the
account code must be entered before the end of dialing for it to be included in the dialed digits.
Forced, standard, and "all calls following" account codes are automatically entered before the
digits. If using an optional account code, it must be entered after seizing a trunk, but before
dialing the number, to be included in the ARS digits.
Database-Programmed Account Codes
® ®
INTER-TEL AXXESS MANUAL VERSION 11.0 – May 2008
System Features
page 6-301 in PROGRAMMING.
Page 5-199
5