Inter-Tel AXXESS Manual page 422

Installation
® ®
INTER-TEL AXXESS
C. CLIENT REQUIREMENTS
16.4 The TCP/IP server requires the following:
•
•
D. CLIENT INSTALLATION
1.
2.
E. PROGRAMMING
16.5 Within the Voice Processing software, to open a direct network connection to a remote
address, you call the open_connection() procedure:
socket_status_t open_connection (void);
// Prepare a socket connection to a remote address.
remote_io = new communication_socket_t;
socket_status_t status = remote_io->initialize (ip_address, port);
if (status == SOCKET_STATUS_SUCCESS) {
}
16.6 With this signature, a direct network connection is tried. Your socket is a direct network
connection. The resulting socket can be used as-is in the Voice Processing application; no fur-
ther code changes are necessary.
Page 3-236
MANUAL VERSION 11.0 – May 2008
An IP address for the client
A modem with speed greater than or equal to 28,800 connected to a serial port
Install the Remote Access Server (RAS).
Using DB Programming, store the information about the account on the server that this
client uses when it dials in: server telephone number and server account (domain, user-
name, and password).
status = remote_io->open_connection ();
Client Requirements