Inter-Tel AXXESS Manual page 479

To set up Remote Messaging, press
9.
NOTE:
to their displays instead of pressing the digits on the keypad.
a.
b.
c.
d.
e.
f.
Personal Options
®
INTER-TEL AXXESS
In the following procedure, some phone users can use the menu buttons next
Press to set up a Primary cascade, or press
1
A prompt tells you what the cascade's current status is. (If desired, press
return to the Personal Options Menu.) Then perform one of the following steps.
To program a cascade level: Press
Enter the number of the level you want to program (1-9). A prompt tells you
1.)
the current status of the level.
You have the following options:
2.)
Press to enable or disable this level. (You cannot enable the level until a
1
notification number is programmed.)
Press to set up or change the personal telephone number. If it is an exten-
2
sion number, press . Or, if it is an outside number, press
1
the number. (If your phone has menu keys, you can enter the special charac-
ters for pause, mailbox, and new message count by pressing their menu but-
tons.) A prompt plays back the number for your verification. If you entered
an invalid or toll-restricted number, you hear a warning and must enter the
number again.
Press to set up or change the pager telephone number. Then enter the
3
number. (If your phone has menu keys, you can enter the special characters
for pause, mailbox, and new message count by pressing their menu buttons.)
A prompt plays back the number for your verification. If you entered an
invalid or toll-restricted number, you hear a warning and must enter the num-
ber again.
To set up time of day for notification: Press
time at which you want to have the message notification start and stop. Enter the
times with two digits for the hour and two digits for the minutes. If entering the
time in 12-hour format, you are prompted to press
NOTE:
If you want to have 24-hour notification, program the starting and ending
times to be the same.
To set up the days of the week for notification: Press
messaging Monday-Friday,
selected individual days, you are prompted to press digits 1-7 which correspond to
the days Sunday through Saturday. Your selection is played back.
To select all or priority-only message notification: Press
all messages or for priority messages only.
2
The options prompt returns. Either select another option, as described above, or
press to save the settings and exit.
#
Voice Processing Features
®
MANUAL VERSION 11.0 – May 2008
.
5
to set up an Alternate cascade.
2
then program the following:
1
. Then, when prompted, enter the
2
for AM or press
1
for all days, or to select individual days. If you
2 3
to
. Then enter
2
for PM.
2
. Then press for
3 1
. Then press for
4 1
Page 4-53
4