Inter-Tel AXXESS Manual page 644

System Features
® ®
INTER-TEL AXXESS
R. DAY AND NIGHT MODES
10.208 There are separate lists in the database for class-of-service, outgoing-access, allowed-
answer, emergency outgoing access, and ring-in assignments for day and night modes. When
an administrator enters the Night Ring feature code, the system uses the night mode lists.
When the system is in day mode, the day lists are used. (Active calls are not affected when the
mode is changed.)
10.209Night mode also affects the night transfer relays on the Options Card (OPC). The relays
are activated when the system is placed in night mode. See
for details.
10.210Administrators can place any or all remote nodes into night mode or day mode. The
default feature code for Enable Network Night is 9861. The default feature code for Enable
Network Day is 9862.
NOTE:
trator resides. See
S. DIRECT INWARD SYSTEM ACCESS (DISA)
NOTE:
10.211DISA is a programmable feature that allows an outside party to dial into the system
from an external DTMF telephone and then dial extension numbers, hunt group pilot numbers,
and off-node device extensions. (DISA callers do not have access to outgoing trunks or page
zones.)
10.212Any of the trunk groups can be programmed to receive incoming DISA calls in day
and/or night mode. When not in use for DISA, the trunk group can be used for placing outgo-
ing calls by stations with outgoing access permission.
NOTE:
mitted over the trunk may be substantially reduced before reaching the phone system. This nat-
ural degradation in tone volume may adversely affect the reliability of the DISA feature. Other
factors which can affect DISA performance are trunk noise and the quality and strength of the
DTMF tones generated by the off-premises phone itself. If the system cannot recognize a DTMF
digit, the call is automatically sent to the primary attendant.
10.213When a DISA user calls a station extension number, the call rings as a direct ring-in
call, even if the called station is busy or in do-not-disturb. The DISA caller hears music or
ringing (determined by a system-wide option in DB Programming) until the Transfer Available
or Transfer Busy timer expires. Then, if the call is not answered, it recalls the called station's
attendant. If the called station is forwarded, the call follows the programmed forward.
10.214When a hunt group pilot number receives a call through DISA, the call rings or circu-
lates according to how the hunt group is programmed (e.g., linear or distributed).
10.215If a caller dials a valid hunt group pilot number that has no members assigned to it, the
call automatically rings at the primary attendant station until the Abandoned Call timer expires.
If the call is not answered before the Abandoned Call timer expires, the call is disconnected.
Page 5-118
MANUAL VERSION 11.0 – May 2008
The Night Ring On/Off feature code (9860) affects only the node on which the adminis-
page 5-273 for a complete explanation of administrator features.
SIP trunks do not support the Direct Inward System Access (DISA) feature.
Due to the natural characteristics of the trunk, the volume level of DTMF tones trans-
page 2-67 in SPECIFICATIONS
Day and Night Modes