Inter-Tel AXXESS Manual page 441

C. TCP/IP NETWORKING
2.31 Messages are forwarded, one or more at a time, using the TCP/IP protocol. The TCP/IP
service is added to the originating and destination Voice Processing PCs. A temporary TCP/IP
session from the originating system to the destination system is established, and messages are
forwarded. See the illustration below.
Voice Processing Unit
2.32 To set up a TCP/IP Network:
Set up the TCP/IP Service as described in the INSTALLATION section
1.
Make sure the Inter-Tel Messaging IP Networking premium feature is enabled.
2.
In the Voice Processor\Devices\Nodes directory, right-click to create your nodes. A
3.
warning appears that states you must restart DB Programming. When you have created
all of the nodes, select
In the Session Manager, restart the DB Programming session.
4.
In the Voice Processor\Devices\Nodes directory, you should see the newly created
5.
Voice Processing Node. Program the description.
Select
6.
Select
7.
ber, for this method (TCP/IP), is the IP number for the Remote Node Voice Processing
Unit. Remember, this is TCP/IP Voice Mail networking, and both Voice Processing PCs
are on a TCP/IP Network. If you do not know the IP number, you must get it.
Create off-node associated and/or non-associated mailboxes in Devices\Mail-
8.
boxes\Remote Node.
TCP/IP Networking
®
INTER-TEL
TCP/IP Service
and then
Yes
and scroll to TCPIP.
Network Type
next to the description you just programmed. This system num-
System Number
Voice Processing Features
®
AXXESS MANUAL VERSION 11.0 – May 2008
Internet Connection
to end the DB Programming session.
OK
Voice Processing Unit
TCP/IP Service
(page 3-229).
Page 4-15
4