Inter-Tel AXXESS Manual page 550

System Features
® ®
INTER-TEL AXXESS
Table 5-4. Diagnostics Mode Feature Codes (Continued)
Feature Name
Diagnostic - Heap Statistics
Diagnostic - ISDN View
Diagnostic - Major Reset
Diagnostic - Mark As Leaks
Diagnostic - Mark As Quiescent
Diagnostic - Minor Reset
Diagnostic - Network Freeze Zone
System Histories
Diagnostic - Network Unfreeze Zone
System Histories
Diagnostic - Network Groups
Diagnostic - Print Auxdata
Diagnostic - Print Message Log
Diagnostic - Print Network Log
Page 5-24
MANUAL VERSION 11.0 – May 2008
U.S.
[Europe]
Code
9947 [9147]
9948 [9148]
9962 [9162]
9945 [9145]
9946 [9146]
9964 [9164]
9939 [9139]
9989 [9189]
9963 [9163]
9972 [9172]
9975 [9175]
9976 [9176]
Definition
This feature code outputs miscellaneous heap information
to Message Print as well as putting up a message on the
phone that indicates the percentage of available dynamic
heap memory. This feature code is useful in determining if
the system is losing heap memory and how quickly the
system may be losing it.
This feature code toggles through the three different ISDN
view output modes.
•
Entering the feature code the first time puts the
ISDN view feature into headers only mode. In this
mode the system outputs all ISDN messages to
message print in header format (e.g., it does not
contain any ISDN information elements).
•
Entering the feature code the second time puts the
ISDN view feature into full mode. In this mode the
system outputs all ISDN message to message print
in full format (e.g., each ISDN information element).
•
Entering the feature code one more time turns this
feature off.
This is used by Inter-Tel software developers and cannot
be used in Beta or Production software.
This is used by Inter-Tel software developers and cannot
be used in Beta or Production software.
This is used by Inter-Tel software developers and cannot
be used in Beta or Production software.
This is used by Inter-Tel software developers and cannot
be used in Beta or Production software.
The system fault history for any freeze zone in the network
can be halted (frozen) or re-enabled using these feature
codes when diagnostics mode is enabled. The fault history
can then be extracted from each zone and used by service
personnel when troubleshooting the system.
Allows an administrator to verify that the Network Groups
on the local node are programmed properly. When 9963 is
entered at an administrator's endpoint, the phone system
initiates pings from each Inter-Tel IP device on the local
node and determines if the other devices respond to the
ping. If a device does not respond to the ping or if a firewall
is detected, the system issues a Message Print message.
(Not Programmable) Sends a report to a designated printer
or file that shows system reset history information to be
used for troubleshooting purposes.
(Not Programmable) Sends a report to a designated printer
or file that lists system error messages to be used for trou-
bleshooting purposes.
This feature code prints the network log to message print.
This feature is useful in determining the system of a net-
worked system.
Diagnostics Mode Feature Codes