Inter-Tel AXXESS Manual page 789

Enter the new password followed by #. You hear a confirmation tone.
3.
Enter the new password again for verification followed by #. You hear a confirmation
4.
tone. If you have a display, it shows PASSWORD SAVED. Your station returns to the
idle state.
47.8 To change the station password using remote programming:
If calling from an outside telephone, access the system through a DISA line. Enter the
1.
DISA security code (if applicable). You hear a confirmation tone.
If programming from another station, lift the handset or press the Speaker button.
Enter the Remote Programming feature code (359). You hear a confirmation tone. If
2.
you have a display, it shows ENTER EXTENSION. Menu button phone users can press
the IC DIR button to use the intercom directory to look up a number.
Enter the extension to be programmed. You hear a confirmation tone. If you have a dis-
3.
play, it shows ENTER PASSWORD. If you entered an invalid extension number, you
will hear reorder tones and can try again.
Enter the extension's password followed by #. You hear a confirmation tone.
4.
If you enter an incorrect password, the display will show INVALID PASSWORD. Out-
side callers will be returned to dial tone, and stations will return to the idle state.
Enter the Program Station Password feature code (392). You hear a confirmation tone.
5.
If you have a display, it shows NEW PASSWORD.
Enter the new password, followed by #. You hear a confirmation tone.
6.
Enter the new password again for verification, followed by #. You hear a confirmation
7.
tone. If you have a display, it shows PASSWORD SAVED. Outside callers will hear
dial tone, and stations return to the idle state.
Station Password
® ®
INTER-TEL AXXESS MANUAL VERSION 11.0 – May 2008
System Features
Page 5-263
5