Inter-Tel AXXESS Manual page 743

Placing the Entire Conference on Hold
32.14 Any inside party involved in a conference can place the conference on hold at his or her
station. The other conference parties remain connected and can converse. The station user that
placed the conference on hold can then place calls or use system features while the conference
is on hold. Then the user can return to the conference on hold. Note, however, that a confer-
ence may not be terminated while it is on hold.
32.15 After a station user has moved a conference to hold, the user may, if desired, establish
another conference. Because each conference is established under a separate CALL button, it is
possible for the user to have access to any individual conference for further call processing. If
the user elects to use the
through the conferences in priority order. The
the top-priority conference. The priority order for the
ences are in effect is:
•
Conference or call on transfer hold
•
Ringing (ring in, recall, or camp on) conference
•
Conference on hold
•
Active conference
32.16 To place the conference on hold (any inside party):
During a conference call:
1.
Inter-Tel Phone: Press the Hold button, or press
vidual Hold feature code (336). The conferenced parties remain connected. The call and
CNF buttons flutter.
Single-Line Set: Hookflash (press
code (336). The conferenced parties remain connected.
NOTE:
ference will recall your station. If the recall is not answered, the conference will recall to
your attendant's station. At the attendant, the call will be terminated automatically after
the Abandoned Recall timer if no inside parties are still in the conference and if it is not
answered by the attendant. (If the attendant answers the call, a conference is re-estab-
lished with the attendant station as one of the conference parties.)
To return to the conference:
2.
Inter-Tel Phone: Press the Hold button,
Single-Line Set: Lift the handset and enter the Conference feature code (5).
Placing the Entire Conference on Hold
®
INTER-TEL AXXESS
button for conference access, the
CNF
RECALL
If you do not return to the conference before the Hold timer expires, the con-
System Features
®
MANUAL VERSION 11.0 – May 2008
button will rotate
CNF
button will always reflect the status of
CNF
button when multiple confer-
CNF
∞
or and enter the Indi-
SPCL
) and then enter the Individual Hold feature
button, or the fluttering CALL button.
CNF
5
Page 5-217