Inter-Tel AXXESS Manual page 543

Table 5-2. Station Feature Codes (Continued)
Feature Name
Display Outside Party Name On/Off
Display Time/Date
Do-Not-Disturb
Do-Not-Disturb Cancel
Do-Not-Disturb On/Off
Do-Not-Disturb Override
Enhanced Speakerphone Enable
Feature Key Default
Group Listen
Handsfree On/Off
Headset Enable
Headset Disable
Headset On/Off
Station Feature Codes
®
INTER-TEL AXXESS
U.S. [Europe]
Code
379 (Display Phone Only) Toggles the display between the
caller's name and number while connected to a CO call
that has outside party name information. If there is no
outside party name or the Expanded CO Call Information
On Displays flag is disabled, the user hears a burst of
reorder tone and sees the CANNOT ACCESS FEATURE
display. If the Display Outside Party Name On/Off feature
code is programmed in a user-programmable button with
a lamp, the lamp is lit when the outside party name is
enabled and off when the outside party number is
enabled.
300 (Display Phones Only) Temporarily displays the system
date and time, username, and extension number during
a call or when other displays are shown.
NOTE:
For SIP (Session Initiation Protocol) endpoints,
this feature code displays the IP address of the endpoint,
not the time/date.
370 Halts all intercom calls, transferred calls, and pages to
371 the station. The cancel code returns the station to normal
372 operation. The ON/OFF code can be used to turn do-not-
disturb on or off. (Inter-Tel phones use the DND button.)
373 (Inter-Tel Phones Only) If enabled in the database,
allows the phone user to break through another station's
do-not-disturb mode when placing an intercom call.
310 (Digital Phones Only) When entered at a digital phone,
this feature code enables the enhanced speakerphone
as described on
∞
use the
395 (Inter-Tel Phones Only) Phones have user-programmable
feature buttons that can be set to enter feature codes.
This code returns the user-programmable buttons to the
database default values.
312 (Inter-Tel Phones Only) Allows a user to transmit a con-
versation over the phone speaker while in handset or
headset mode.
319 (Inter-Tel Phones Only) Disables/enables the phone's
handsfree intercom answering. Incoming intercom calls
ring as private calls if handsfree answering is disabled.
315 (Inter-Tel Phones Only) Signals the system that a head-
316 set has been connected to the phone when entering the
317 enable code. The disable code returns the phone to nor-
mal operation. The on/off feature code can be used to
toggle the feature ON or OFF.
System Features
®
MANUAL VERSION 11.0 – May 2008
Definition
page 5-124. (Digital phones can also
+ Speaker buttons.)
5
Page 5-17