Static Records; Miscellaneous - Inter-Tel AXXESS Manual

Programming
® ®
INTER-TEL AXXESS
•
6.25 Repairs:
6.26 Repairs for Referential Integrity are different depending on the field that has the corrup-
tion. The possibilities are as follows:
•
•
•

Static Records

6.27 This test ensures that all static records are present in the database.
6.28 Possible Error Messages:
•
•

Miscellaneous

6.29 This test checks for miscellaneous business rules.
6.30 Possible Error Message:
6.31 Station <extension> is its own attendant: This error message indicates that the station
is programmed to serve as its own attendant. The DB Test will set the attendant to none and the
Repair Status will show [Set to None Device]. This test ensures that all static records are
present in the database.
Page 6-38
MANUAL VERSION 11.0 – May 2008
<table name>/<column name> contains a reference to a board of the wrong type
[BoardID:<board ID>, Type:<board type>]: The indicated value contains a reference
to a board that is not the proper type. For example, the Primary Rate card records are
connected to a Board record for a keyset card.
If a lack of a valid reference makes the record no longer useful, a repair is made by
deleting the record. The Repair Status will be Record Deleted.
If a reference is referring back to a device or object that is not valid or not present, sev-
eral repairs can be made. They are as follows:
— Set to Extension <extension number> [<device ID>]: In this case, the repair was
made by replacing the bad reference with a device of the same extension, but of
the proper type.
— Set to None Device: In this case, the repair was made by replacing the bad refer-
ence with None.
— Set to Current Device: In this case, the repair was made by replacing the bad ref-
erence with the current device.
— Set to First Available: In this case, the repair was made by replacing the bad ref-
erence with the first device/object found.
It is possible for the repair to be complicated, and therefore not attempted. In this case,
the Repair Status will be Not Repaired.
<Table name> contains an invalid number of records [<current number> instead of
<desired number>]: The table should have the "desired number" of records. However,
it has the "current number" records. This corruption is repaired by deleting unneeded
records and adding records that are missing. The Repair Status will be: Added/Deleted
Records, Added Records, or Deleted Records.
<Table name> is missing <specific record>: This corruption occurs when a specific
record is missing. Only some of these corruptions will be repaired. The Repair Status
can be: Rebuilt Table, Created None Device, Created Voice Processing Local Node,
Created Unused Trunk Group, or Not Repaired.
Static Records