Table 3-27.
Avdap Version
8.1 and Earlier
8.2 and Later
Table 3-28.
Avdap version
8.1 and Earlier
8.2 and Later
14.28 If the AvdapMon utility is run on the Voice Processing PC itself, there is a shortcut
notation to specify the IP and port numbers. In this case, simply type
avdapmon followed by a space, a period, a space, and a period again).
14.29 To protect the Voice Processing PC against unauthorized access through AvdapMon, a
password can be required to use the AvdapMon utility. This password is set through DB Pro-
gramming (see
Voice Processing Configuration
14.30 The Voice Processing software runs as a service (called "avdap") under the Windows
o p e r a t i n g s y s t e m . I t g e t s i t s s t a r t u p p a r a m e t e r s f r o m t h e r e g i s t r y k e y
HKEY_LOCAL_MACHINE\SOFTWARE\AVDAP\Parameters. Information such as the IP
address AVDAP listens to, the size of log files, and the drive to map as B: Drive, can be speci-
fied there.
14.31 The Inter-Tel Voice Mail configuration utility provides a user-friendly graphical user
interface to specify these parameters without accessing the registry directly. The fields that can
be modified through the configuration utility include:
•
IP Addresses and IP Port for AVDAP and CP
•
Select or deselect IP for ASAI Connection
•
Enable or disable log files
•
The log files size and number of log files
•
Serial port used by AVDAP for ASAI connection
•
Enable or disable SMDR Polling on serial port
•
Drive to map B: Drive to (map_b_drive for save/restore to/from network drive)
•
Ignore the parameters in Avdap.opt file
14.32 The Configuration Utility uses various registry keys under HKEY_LOCAL_
MACHINE\SOFTWARE\AVDAP to keep track of the values of the fields. When you perform
a Voice Processing database save, it saves the new values to the keys. In addition, it manipu-
lates the MULTI_SZ in HKEY_LOCAL_MACHINE\SOFTWARE\AVDAP\Parameters based
on those values, so that Voice Processing obtains the appropriate values during startup.
Voice Processing Configuration
®
INTER-TEL
AXXESS
VPU with Static IP
Windows NT VPU
Do Not Modify
VPU's IP Address
VPU with Dynamic IP
Windows NT VPU
VPU's IP Address
VPU's IP Address
page
6-351).
®
MANUAL VERSION 11.0 – May 2008
Windows 2000 VPU
127.0.0.1
127.0.0.1
Windows 2000 VPU
127.0.0.1
127.0.0.1
avdapmon
Installation
3
. (that is,
Page 3-229