Inter-Tel AXXESS Manual page 722

System Features
® ®
INTER-TEL AXXESS
C. PHONE ON-HOOK MONITORING
26.8 A phone user with a speakerphone can monitor the call (listen to a recorded message,
wait for the call to be answered, or wait on hold), and then speak handsfree when answered.
26.9 To use on-hook monitor:
1.
2.
D. PHONE GROUP LISTEN FEATURE
26.10 The Group Listen feature allows a phone user to transmit a conversation over the phone
speaker while in handset or headset mode. This allows other people in the room to listen to the
conversation. However, the phone microphone remains disabled so that only the headset or
handset user can speak.
26.11 This feature cannot be used on a handsfree call. The user must be on a call using the
handset or a headset before entering the feature code. Group Listen cannot be used on single-
line sets.
26.12 To turn the group listen feature on or off during a call:
26.13 When the Group Listen feature is active in handset mode, the Speaker lamp will remain
unlit. This allows the user to place the call into handsfree mode at any time during the call by
pressing the Speaker button. When the feature is active in headset mode, the Speaker lamp is
lit. Pressing the button will disconnect the call.
NOTE:
trol adjusts the volume level of the headset speaker or handset speaker, not the external
speaker.
26.14 The Group Listen feature code can be programmed under a feature button or DSS/BLF
button just like any other feature. The button functions as a toggle. If the button has a lamp, it
is lit when the feature is activated and unlit when the feature is turned off.
26.15 If the Group Listen feature is active when an OHVA call is received by the phone, the
OHVA call will camp on (because the speaker is busy).
Page 5-196
MANUAL VERSION 11.0 – May 2008
While on a call, press the Speaker button and hang up. If you do not want to be heard
and if the MUTE button is not lit, press the
∞
press or
SPCL
You can hear the other party (if the microphone is muted, you cannot be heard). The
Speaker button is lit (and the MUTE button is lit if the microphone was muted).
To return to the conversation: You may lift the handset or speak handsfree. (If the
microphone was muted, press the lit
speak. The MUTE button goes off.)
While on a call using the handset or a headset, press
Group Listen feature code (312). You hear a confirmation tone, and the display shows
GROUP LISTEN ON or GROUP LISTEN OFF. (The other party will not hear the con-
firmation tone.)
When using Group Listen on a Model 8500, 8520, or 8560 endpoint, the volume con-
MUTE
and enter the Microphone Mute On/Off feature code (314).
button or the
MUTE
button or menu button, or
MUTE
menu button to
UNMUTE
∞
or and enter the
SPCL
Phone On-Hook Monitoring