Inter-Tel AXXESS Manual page 421

B. SERVER INSTALLATION
16.3 On the PC that serves as a voice mail server, create or select a conventional user
account the voice mail client may use for the dial-in. You must have the privilege to modify
this account to complete this installation. This requirement may prevent the use of an account
from elsewhere in the domain. In the example below, account "voice_mail_networking" is
used.
Install the Remote Access Server (RAS): Open
1.
select
Select
2.
the installation files, which is in the i386 directory on the Windows-based installation
CD.
Next, you are asked if you want to install a modem. If you do, you'll need to specify the
3.
make and model of the modem as well as the port to which it is connected. (This infor-
mation can also be set under the Modems icon in the Control Panel.) Configure the
modem to receive calls (either exclusively or also permit dial out), then select
Select
4.
In the Network Configuration dialog, specify the level of encryption to use for account
5.
information exchange. Select either
Microsoft encrypted authentication
to exit.
Select
6.
a.
b.
c.
If NetBEUI or IPX is selected in the Network Configuration dialog, dialog boxes with
7.
configuration options appear. Select
If you are asked if you want to enable NetBIOS Broadcast Propagation, select the
8.
default answer
Select
9.
When you return to the Network dialog (the one with the Services tab), select
10.
and the configuration is reviewed and saved.
You are asked if you want to restart the computer. Select
11.
Start
12.
Select
13.
Grant dial-in permission to the account that the client is to use for the dial-in, then exit
14.
the Admin program.
Open
15.
Select
16.
Select
17.
Restart the computer. This should also start the Remote Access Server.
18.
Open
19.
Select
20.
Server Installation
®
INTER-TEL AXXESS
. Then select .
Services Add
and select
Remote Access Service
in the Remote Access Setup dialog.
Network
for TCP/IP.
Configure
Change the network access scope for remote TCP/IP clients to
.
only
Select the option to use a static address pool, and enter the range of IP addresses.
Select for this dialog, then
OK
.
No
in the Remote Access Setup dialog.
Continue
(under Start - Programs - Administrative Tools).
Remote Access Admin
under the Users menu.
Permissions
in the Control Panel, then select
Services
and make the Remote Access Server service's startup automatic.
Startup
, then select in the Services dialog.
OK Close
in the Control Panel, then select
Network
and
Remote Access Service
®
MANUAL VERSION 11.0 – May 2008
in the Control Panel, then
Network
. You are asked to verify the location of
OK
Require encrypted authentication
. Make sure that TCP/IP is selected and select
for the Network Configuration dialog.
OK
.
OK
.
Yes
Remote Access Server
.
Services
.
Properties
Installation
.
OK
or
Require
OK
This computer
Close
.
Page 3-235
3