Inter-Tel AXXESS Manual page 297

NOTE:
the ATM Switch. It is also recommended that the CP Server not be off-site because the UTP5
cable is unshielded.
F. DIGITAL KEYSET CARD (DKSC)
Do not install an analog phone on a Digital Keyset Card, or vice versa. Installing a phone on
the wrong type of station card can damage both the phone and the card.
10.21 Install the Digital Keyset Cards (DKSC) and/or 16-port Digital Keyset Card (DKSC-16
or DKSC-16+) as described below. See
10.22 See
ware IPRC.
NOTE:
power must be turned off to prevent damage to the card. All other cards can be inserted or
removed with power on.
Make sure that all components on the cards are seated securely in their sockets and that
1.
no pins are bent.
NOTE:
before installing the DKSCs or DKSC-16s.
Install the DKSCs and/or DKSC-16s one at a time in the slots to be used for station
2.
connections. The component sides of the cards must face right. Any type of card may
be installed in any of the first seven slots (in any chassis), and slots may be skipped, if
desired.
NOTE:
default configuration, adjustments must be made in DB Programming. Circuit 1.1.1 (a
DKSC circuit) is preset as an administrator and as the primary attendant. If changing
card types (e.g., changing from a DKSC to an LSC), see the programming procedures
on
Digital Keyset Card (DKSC)
INTER-TEL
If the CP Server uses the UTP5 Adapter, the CP Server must be placed within 100 m of
page 6-121 for instructions about how to convert a DKSC-16 to a v8.2 or later firm-
When inserting or removing the CPU card, CPC, or Network Clock Card, the system
If installing any single-line devices or off-premises extensions, see
If, when first powered up, the actual cards installed do not exactly match the
page 6-114 and to the information on
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
CAUTION
Figure 3-55 on page 3-114 for an illustration.
pages 3-16 and 3-17.
Installation
3
page 3-70
Page 3-111