Inter-Tel AXXESS Manual page 787

46.15 To place your busy station in do-not-disturb while a call is camped on:
If, while on a call, you hear call waiting signals and you want to let the caller know you do not
want to be disturbed:
Phone: Press the DND button or press
turb feature code (370 or 372). The button lights. The display shows DO-NOT-DIS-
TURB ON. The intercom caller is no longer camped on and receives do-not-disturb
indications.
Single-Line Set: (This procedure will interrupt your call in progress.) Hookflash (press
RECALL
is no longer camped on and receives do-not-disturb indications. Hookflash (press
RECALL
46.16 Do-Not-Disturb Override
46.17 If your phone is enabled for do-not-disturb override and you hear do-not-disturb tones
when placing an intercom call, you may use the following procedure to break through do-not-
disturb and complete the call.
46.18 Do-not-disturb override (phones with this feature enabled only):
When you hear do-not-disturb tones while placing an intercom call, press
is idle, the call rings as a private intercom call. If the called station is busy, your call
camps on.
Do-Not-Disturb
INTER-TEL
) and enter the Do-Not-Disturb feature code (370 or 372). The intercom caller
) twice to return to the current call.
and enter the Do-Not-Disturb Override feature code (373). If the called station
SPCL
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
∞
or and then enter a Do-Not-Dis-
SPCL
System Features
∞
or
Page 5-261
5