System Programming; System Programming; Introduction - Inter-Tel AXXESS Manual

Programming
® ®
INTER-TEL AXXESS

SYSTEM PROGRAMMING

1. INTRODUCTION

1.1
programming areas are displayed on the window on the right:
•
•
•
•
•
•
•
•
•
•
•
•
1.2
•
•
•
•
NOTE:
nance\Major Reset Scheduling.
1.3
Page 6-106
MANUAL VERSION 11.0 – May 2008
When you click on
System
Cabinets (see page 6-110)
Devices and Feature Codes (see
Flags (see page 6-258)
Hunt Group-Related Information (see
IP-Related Information (see
Maintenance (see page 6-268)
Numbering Plan (see page
Station-Related Information (see
Trunk-Related Information (see
Timers and Limits (see page
Report Programming (see
System Manager (see page
Also shown are the following system-wide parameters (see
Periodic Backup Database Save Time
Periodic Backup Database Save Retry Attempts
Enable Periodic Backup Database Save
Voice Processor Enable
As of version 8.2, the major reset parameters are located under System\Mainte-
Each of these programming areas are described individually in the following pages.
in the left side of the programming window, the following
page 6-156)
page 6-263)
page 6-265)
6-280)
page 6-301)
page 6-319)
6-329)
page 6-339)
6-341)
page 6-107):

Introduction