Review And Update For Enabling A Voice Processor - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

Restart a local DB Programming session.

After the voice processor is enabled, it can be configured and programmed in accor-

dance with customer requirements. See the following graphic showing a sample of the

Voice Processor folder contents.

From the DB Studio menu bar, select Operations – Database Operations –

Save Voice Data to:

processor database.

Review and Update for Enabling a Voice Processor

2.11 Inter-Tel Axxess platforms support any of the following voice processors: Enterprise

Messaging (EM), an Embedded Voice Mail Card (EVMC), or a Voice Processing Unit (VPU).

And, for proper configuration, DB Programming requires that the voice processor type is iden-

tified. After the VP is physically connected, the system senses which type it is.

2.12 As with previous versions, a voice processor connected to an Inter-Tel Axxess platform

auto-enables when the system boots up. To avoid the risk of overwriting an established data-

base with default values, Inter-Tel recommends connecting the voice processor first, then con-

necting with a remote mode session of DB Programming, and then saving.

2.13 To save a voice processor database in remote mode:

Connect the voice processing unit equipment to the system in accordance with Inter-Tel

installation instructions. See the applicable installation manual.

In remote mode, launch Session Manager and start a DB Programming session.

Review and Update for Enabling a Voice Processor

. Identify the location where you want to store the system database, then check the

box and identify the location where you want to save the voice

. System and voice processor databases are saved to the locations indicated.

MANUAL VERSION 11.0 – May 2008

Table of Contents