Inter-Tel AXXESS Manual page 720

Hide thumbs Also See for AXXESS:

Table of Contents

System Features

26.5 To place a call using automatic route selection:

MANUAL VERSION 11.0 – May 2008

Inter-Tel Phone: While on or off hook, enter the Automatic Route Selection feature

code (92000), or press the ARS button. You hear dial tone.

Single-Line Set: Lift the handset and enter the Automatic Route Selection feature code

(92000). You hear a single progress tone followed by dial tone.

If required, enter a forced account code using the keypad or a pre-pro-

grammed speed-dial button (see

CODE and the digits as they are entered. You hear a progress tone when the code is

Dial the telephone number. Use the

Include the area code, if needed. You hear one of the following signals.

Single Progress Tone: Your call is being placed. The associated individual trunk

or CALL button flashes slowly. Menu button phone users have the same options

as described for outgoing calls on the previous page.

Busy Signals, and then Music: All of the trunks in the route group are busy. Do

one of the following:

Camp-on and wait for the trunk.

Request a callback (queue). The system places your station in a queue for the

trunk. When you hear ringing and the display shows TG XXXX (or group

name) IS NOW AVAILABLE, lift the handset; phone users may also need to

press the fast flashing CALL button or individual trunk button (or the

button). You hear dial tone and digits being dialed. The associ-

ated individual trunk or CALL button flashes slowly.

Repeating Reorder Tones: You are restricted from the number dialed or from

using the route selected. The display shows INVALID OUTSIDE NUMBER or

RESTRICTED OUTSIDE NUMBER. If the number that you dialed does not

match any of the programmed ARS route group patterns, the display shows

UNABLE TO ROUTE CALL.

5-198). Display phones show ENTER ACCOUNT

button to backspace if you make a mistake.

Placing Outside Calls

Chapters

Table of Contents