Inter-Tel AXXESS Manual page 671

To save the setting on Executive Display, Standard Display, Basic Digital, Model
2.
8560, Model 8520, and Model 8500 Phones: Press both edges of the Volume button at
the same time. Display phones show VOLUME SAVED.
To save the setting on Professional Display, Associate Display, and Eclipse Basic
Digital Phones: Press the center of the
SAVED.
If this step is not performed, the phone will return to the previous volume level when
the call or tone ends (except for the ringing alert tone or background music volume,
which is automatically saved at the most recent volume level).
12.92 To return a phone to default volume levels:
While on or off hook, enter the Default Station feature code (394). If off hook, hang up.
The display shows STATION DEFAULTED.
NOTE:
background music, ring intercom always, all calls following account code, headset
mode, and queue requests; and restores handsfree mode, pages, hunt group calls, and
system forwarding.
G. SELECTABLE RING TONE
12.93 The tone of the phone ring signals (all tones except call waiting) can be changed by the
user to create distinctive ringing. If stations are placed close together, changing the tone makes
each station's ring easier to recognize. On all phones, the tone is changed by entering a feature
code and a code, as described below.
12.94 There are ten ring tone options (0-9). Selection 0 will turn off the ring signals.
NOTE:
same tone. However, you can still use setting 0 to disable ringing.
12.95 To change phone ring tone:
While on hook, enter the Program Ring Tone feature code (398). The display shows
1.
SELECT RING TYPE (0-9) OR SCROLL.
Select the desired tone.
2.
—
—
—
Lift and replace the handset or press the pound (hash) button (
3.
ume button, or the
phone rings (unless ringing was disabled). The display shows RING TYPE X SAVED.
Selectable Ring Tone
INTER-TEL
Entering this feature code also cancels do-not-disturb, manual call forwarding,
Executone phones have only eight distinct ring tones. Settings 1 and 9 are actually the
To select a specific ring tone: Enter a number 1-9 for the desired ring tone. The
display shows RING TYPE X SELECTED.
To scroll through the tones: Press the low end of the Volume button or the
button to scroll backward through the tones. Press the high end of the Vol-
VIOUS
ume button or the button to scroll forward. (You cannot scroll to selection 0,
NEXT
you must enter it as described below.) The display shows RING TYPE X
SELECTED.
To turn off ringing: Enter
play shows RING TYPE OFF SELECTED.
button to exit. The selected tone will be heard when the
ACCEPT
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
button. Display phones show VOLUME
or press the
RINGER OFF
0
System Features
PRE-
menu button. The dis-
), both ends of the Vol-
#
Page 5-145
5