Inter-Tel AXXESS Manual page 865

Hide thumbs Also See for AXXESS:
Table of Contents

Advertisement

Select
3.
ate IP Softphone
EITHER, Select a starting extension for the devices. Then click a device in the list and
4.
enter the appropriate device ID.
OR, Click
Windows Open dialog.) When you import the file, the device IDs are read from the top.
This means that if there are six device IDs in the file, but there are eight devices, only
the first six will be assigned an address. In addition, if there are eight device IDs in the
file, but only six devices, only the first six addresses will be used.
NOTE:
conflict with any other Inter-Tel IP endpoints configured into the system. Inter-Tel recom-
m e n d s t h a t t h e a dm in i s t r a t o r u s e a d e f i n ed d e v i c e I D s c h e m e s u c h a s
86:02:00:xx:xx:xx. For troubleshooting purposes, Inter-Tel recommends using the exten-
sion number as the last digits of the Device ID.
Click
5.
IPRC has enough voice resources for the number of devices you programmed. If the
number of devices exceeds the number of resources, an error message appears.
Although the system allows you to program more devices than available resources,
some IP devices may not come online unless the number of voice channels matches the
number of IP devices. To ensure there are enough voice channels, make sure you have
programmed all of the channels as VoIP. If all of the channels are programmed for VoIP,
consider adding another IPRC to support additional devices you want to install.
Double-click the
6.
displayed. Program the following fields as described on
Programming the Model 8602 IP Softphone
®
INTER-TEL
AXXESS
from the device option. Right-click on the screen and select
IP Softphone
. The Get IP Extension dialog appears.
to import the device IDs from a .txt file. (This opens the standard
Browse
All device IDs must be unique. The user must choose a device ID that does not
to accept the extension and device IDs. The system then verifies that the
OK
that you have just created. The device-specific fields are
IP Softphone
Programming
®
MANUAL VERSION 11.0 – May 2008
page 6-202
or online help.
Cre-
6
Page 6-15

Advertisement

Table of Contents
loading

Table of Contents