Inter-Tel AXXESS Manual page 786

System Features
® ®
INTER-TEL AXXESS
2.
3.
4.
46.14 To cancel do-not-disturb:
Page 5-260
MANUAL VERSION 11.0 – May 2008
To select message 01 (DO-NOT-DISTURB):
Phone: Press the Speaker button, or lift and replace the handset. The
ton lights.
Single-Line Set: Hang up.
To select any of the 20 pre-programmed messages: Enter the desired number (01-20)
or press the menu button to begin scrolling. Display phone users may scroll
SCROLL
through the messages by pressing the high end of the Volume button or the
ton to go forward or the low end of the Volume button or the
backward (the display shows the selected message). If you enter an invalid message
number, you will hear reorder tones, and the display shows INVALID DND MESSAGE
NUMBER; try again.
If desired, customize the second line of the message: Use any combination of the fol-
lowing methods.
•
Remain in numeric mode: Press the keypad buttons to enter the desired number.
Use the pound (hash) button (
a colon (:). Phone users can press the
press the button to backspace.
MUTE
•
Change to alphanumeric mode (phones only): Press the
lights) or the
USE ALPHA MODE
See the chart above. Phone users can press the
twice to leave a space, or press the
•
Use speed-dial and/or redial numbers (phones only): In either numeric or alpha-
numeric mode, you can speed dial a number (using the speed-dial button or fea-
ture code). In numeric mode you can press the
characters. You may chain speed-dial and/or redial numbers together.
Terminate programming:
Phone: Press the Speaker button or
button lights. (Display phones show selected message. Date and time appear on the sec-
ond line if there is no customized message.)
Single-Line Set: Hang up.
Phones with Menu Buttons: While on hook, press the lit
goes off and the display shows DO NOT DISTURB OFF.
Other Phones: While on hook, press the lit
Disturb feature code (371) or Do-Not-Disturb On/Off feature code (372). The button
goes off and the display shows DO NOT DISTURB OFF.
Single-Line Set: Lift the handset, enter the Cancel Do-Not-Disturb feature code (371)
or Do-Not-Disturb On/Off feature code (372), and hang up.
) for a hyphen (-) and the asterisk button (
#
button once to leave a space, or
FWD
menu button, then enter the desired characters.
button once to advance or
FWD
button to backspace.
MUTE
button to enter the stored
REDIAL
. Or, lift and replace the handset. The DND
ACCEPT
button or enter the Cancel Do-Not-
DND
but-
DND
but-
NEXT
button to go
PREVIOUS
) for
button (the button
MSG
button. The button
DND
Do-Not-Disturb