Inter-Tel AXXESS Manual page 796

System Features
® ®
INTER-TEL AXXESS
A. INITIATING OR ANSWERING A CALL USING THE PHONE
51.8 The phone user can place or receive a data call using the phone and then transfer it to
the data device. It can be an intercom or outside call, and the phone can be on or off hook. The
call is placed to or received from another modem-equipped data device.
51.9 After the connection is established, the phone user presses the
∞
If the data device does not answer before the Transfer Available timer expires, the call recalls
the phone station.
51.10 Transferring a call to the data device using the
providing ring voltage to the data device. The user must manually cause the data device to
answer the call. (Note that if the phone user wants to cause ring voltage to be applied to the
data device, the Transfer feature must be used to send the call to the data device.)
51.11 While the user is establishing the call using the phone, the
the time that the user presses the
ton will flash. While the data device is on an active call, the
ciated phone(s) (indicating that the data call may be retrieved by the phone). If the phone is off
hook, the user will hear dial tone.
51.12 To place a data call using the phone:
1.
2.
3.
4.
B. INITIATING A CALL USING THE DATA DEVICE
51.13 The data device can be used for initiating a data call, without the use of a phone. The
user causes the modem to select a trunk or intercom channel and dial the desired number.
51.14 The data device can dial an extension number or a trunk access code followed by a
pause and then a telephone number. As soon as the data device comes off hook, the
button is lit at the associated phone(s) to indicate that the data port is busy. The button remains
lit until the data device finishes dialing (outside call) or the station user answers (intercom
call). This protects the call during dialing to ensure that the dialing is not interrupted. A phone
user who attempts to transfer another data call to the data device or pick up the data call while
the button is lit will hear a burst of reorder tone.
51.15 When a data device places an intercom call, the call is placed in the non-handsfree
mode. (This can be changed in DB Programming, if desired, by disabling the Ring Intercom
Always flag. See
tion station from the data device appears as a normal intercom call with the usual displays and
tones.
Page 5-270
MANUAL VERSION 11.0 – May 2008
or and enters the Data feature code (340) to transfer the call to the data device.
SPCL
Place or receive an intercom or outside call.
When you hear modem tone, press the
enter the Data feature code (340). The
Hang up or press the Speaker button. The
device answers, and the display returns to date and time. The phone can now be used as
usual.
Operate the data device according to the manufacturer's instructions. The device must
be able to come off hook and answer the incoming call.
If you want to return the active data call to your primary voice path, press the fluttering
button. The call cost and elapsed time of the data call are displayed.
DATA
page 6-213 in PROGRAMMING.) The incoming intercom call to the destina-
DATA
button, until the data device answers, the
DATA
button, or press
DATA
button flashes slowly.
DATA
button begins to flutter when the data
DATA
Initiating or Answering a Call Using the Phone
button, or presses
DATA
button places the call without
button is unlit. From
DATA
DATA
button flutters on the asso-
DATA
∞
or
SPCL
but-
and
DATA