Inter-Tel AXXESS Manual page 982

Programming
® ®
INTER-TEL AXXESS
•
•
NOTE:
also affect ISDN trunks that use the "en bloc" method for delivering digits. For example, if the
Transmit Sending Complete Indication flag is enabled and the Sending Complete Indication
value is set to '#' Digit in Called Number IE, the system will insert a pound [hash] digit (#) after
the collected digits.
Framing Type
3.90 The type of framing scheme used by the T1/E1 trunks connected to the card can be as
follows:
•
•
3.91 Select the current Value and use the drop-down list box to scroll to the desired setting.
Then press
3.92 Zero Code Suppression Scheme: The trunk zero-suppression scheme supports the fol-
lowings:
•
•
•
3.93 To change the setting, select the current Value and use the drop-down list box to scroll
to the desired setting. Then press
Page 6-132
MANUAL VERSION 11.0 – May 2008
— Overlap And Equal Access Facility: Sends any equal access digits in the setup
message, but sends overflow digits that are not considered equal access in subse-
quent information messages. This option allows overlap sending.
— Overlap Sending Enabled For All Calls: Sends all digits in subsequent informa-
tion messages (that is, none are included in the setup message). The number of
digits sent in each information message is limited by the Maximum Digits in
Called Number IE setting. This option allows overlap sending.
Sending Complete Indication: Select how the phone system will indicate that it has
finished sending digits to the network provider. If Sending Complete IE is selected, the
phone system includes a sending complete information element in the setup or informa-
tion message. If '#' Digit in Called Number IE is selected, the phone system inserts a
pound [hash in Europe] digit (#) at the end of the digits in the called number informa-
tion element. By default, this is Sending Complete IE.
NOTE:
This field is ignored if the Transmit Sending Complete Indication flag is dis-
abled.
Transmit Sending Complete Indication: Enable this flag to have the phone system
send the complete indication type selected in the Sending Complete Indication field. If
this flag is disabled, the phone system will not send any indication to the network pro-
vider that no more digits follow. By default, this is disabled.
The Transmit Sending Complete Indication and Sending Complete Indication fields
T1 Trunks—D4 Superframe or Extended Superframe (ESF)
E1 Trunks—Common Channel Signaling or Channel Associated Signaling
or click on another field to save the change.
ENTER
Trunks on the card—AMI (Bit 7), Bipolar Eight Zero Substitution (B8ZS), or None
T1/PRI and T1/E1/PRI cards—B8ZS or None
E1/PRI cards—HDB3 or None
T1, T1/PRI, or E1/PRI Card Configuration and Programming
or click on another field to save the change.
ENTER