Clear Filter, Save Filter, And Load Filter Command Buttons - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

[extension] LIKE "12*" AND [username]

[extension] < "1234" AND [username] =

[slot_number] = 1 AND [extension] >=

Clear Filter, Save Filter, and Load Filter Command Buttons

10.43 There are three command buttons below the Specify A Filter box. They are used as fol-

MANUAL VERSION 11.0 – May 2008

SQL Command Combination Examples (Continued)

SQL Statement

Clear Filter: You can remove the entire filter specification by selecting

This will remove the entire entry in the Specify A Filter box.

Save Filter: There will probably be instances where you have a complex, or a com-

monly-used search that you will want to use over again. When you have a search state-

ment that you want to keep for future use, you can save it to floppy or hard disk for

later retrieval. The way to do this is to select

the Specify A Filter box. A dialog box will appear asking you to specify a location and

file name. The PC will then save the file in that location with an extension of "FLT."

Load Filter: When you want to recall a saved search, select

will allow you to find your previously saved search string and restore it to the Specify

A Filter box.

Clear Filter, Save Filter, and Load Filter Command Buttons

Search Result

Extensions beginning with the digits 1 and 2 that

have usernames beginning with the letter F

Extensions with a number lower than 1234 that

also have a username of FRED

Stations on board number 1 having extension

numbers 1000 and higher

when the search statement is in

Clear Filter

. A dialog box

Table of Contents