Inter-Tel AXXESS Manual page 714

System Features
® ®
INTER-TEL AXXESS
2.
24.14 To answer messages at a non-display phone or single-line set:
1.
2.
Canceling a Waiting Message
NOTE:
ing voice mail message. The
out saving or deleting the voice mail.
24.15 To cancel a displayed message without answering at a phone:
1.
2.
24.16 To cancel a message without answering at a single-line set or without displaying
messages at a phone:
1.
2.
Page 5-188
MANUAL VERSION 11.0 – May 2008
If the button and/or Message Lamp continues to flash, there is another message
MSG
(display shows the next message). Repeat step 1.
Inter-Tel Phone: If you see a flashing
Depending on how the message was left, an intercom call is placed to either the station
that left the message or your message center.
Single-Line Set: If you hear single-line message waiting tones (six tones) after lifting
the handset or hookflashing (pressing
sage feature code (365). Depending on how the message was left, an intercom call is
placed to either the station that left the message or your message center.
If the called station does not answer, is busy, or is in do-not-disturb, you may hang up
or leave a message at that station before hanging up. You will continue to receive mes-
sage waiting indications (
attempting to retrieve the message or canceled the message after hanging up. The mes-
sage waiting indications are canceled when you are actually connected with the called
station. Message indications from voice mail will only be cleared if you save or delete
the waiting voice mail message. The
sage indication without saving or deleting the voice mail.
If message waiting indications continue, there is another message. Repeat this proce-
dure.
Message indications from voice mail will only be cleared if you save or delete the wait-
MSG
When the message you want to cancel appeared (as described on the previous page),
remain on hook and press the asterisk (
message is canceled.
If the button continues to flash, there is another message. The display shows the
MSG
next message. Either respond to it or cancel it.
If you receive message waiting indications, enter the Cancel Current Message feature
code (368). The message is canceled.
If you continue to receive message waiting indications, there is another message. Either
respond to it or cancel it.
button, press the
MSG
) when the station is idle, enter the Mes-
RECALL
button flash or tones), unless you left a message while
MSG
button will re-light if you clear the mes-
MSG
button will re-light if you clear the message indication with-
) button or the
button.
MSG
menu button. The
DELETE
Canceling a Waiting Message