Inter-Tel AXXESS Manual page 468

Voice Processing Features
® ®
INTER-TEL AXXESS
Notification Numbers
9.26 Each cascade level has a programmed notification number that can be an extension
number or an outside telephone number.
9.27 When an outside telephone number is used, the system accesses an outgoing trunk
using the code programmed for that level that contains a pre-programmed trunk access code
and followed by an outgoing access termination feature code, if needed.
9.28
where a person answers (personal number).
•
•
Sample Pager Programming
9.29 The following is a sample programming sequence for enabling pager notification. In the
example, the pager number is 555-2500, trunk group 1 is used for notification, the display
should show 961-9000 when a message is left in mailbox 1001, and the paging company
requires a # after the digits.
1.
2.
3.
4.
Page 4-42
MANUAL VERSION 11.0 – May 2008
Notification calls to outside telephone numbers can be sent to a pager or to a number
If the call goes to a pager, the system dials the programmed Pager Dial String, then dis-
connects the call. The dial string should include any digits that the paging company
requires when the call is answered, the pager LCD number, and the pager termination
code, if needed. Also, if desired, the pager string can be programmed to show the num-
ber of the mailbox that placed the call and/or the number of waiting messages in the
mailbox.
If the call goes to a personal number, the system plays a prompt announcing that the call
is from Voice Mail, play the directory name or mailbox number that originated the call,
and plays user instructions. The listener can then enter the mailbox number's password
to gain access to the mailbox and hear the message. The listener has three chances to
enter a correct password. If the system receives an incorrect password three times, the
Voice Mail system disconnects the call immediately, and the attempt is considered
unsuccessful.
In Voice Processor Programming, create a Message Notification/Retrieval application.
If desired, set toll restriction for the Message Notification/Retrieval application in Voice
Processor\Devices\Applications\Class of Services.
Ensure the Message Notification/Retrieval application has outgoing access for trunk
group 92001.
In Mailbox Programming for mailbox 1001, enable Remote Notification and program
the following for the primary and/or alternate message notification:
Notification Category: Determine whether all messages or only priority messages
a.
cause message notification.
Call For Each New Message flag: Determine if you want to call the pager every
b.
time a new message arrives, even while there is an unheard message waiting.
Start Time, Stop Time, and Day of Week: Set the parameters for when you want
c.
the pages to be sent.
Cascade Table: Program the cascade table(s) you need. In the example, the table
d.
would have:
– Notification Type: Pager
– Notification: Enabled
– Notification Destination Type: CO
Notification Numbers