Inter-Tel AXXESS Manual page 818

System Features
® ®
INTER-TEL AXXESS
5.
Page 5-292
MANUAL VERSION 11.0 – May 2008
To Program A Trunk Group: Press
program the trunk group, as follows:
The display shows ENTER TRUNK GRP EXTENSION. Enter the extension
a.
number of the trunk group to be programmed using one of the methods described
in paragraph 52.36.
The display shows ENTER TRUNK GROUP OPTION. Select one of the follow-
b.
ing options. To view the last three options on an Executive Display, Professional
Display, or Model 8560 Phone, press the arrow (<< or >>) menu button at the bot-
tom of the display.
Answer Access For Day Or Night Mode: To program the station(s) that will have
answer access for this trunk group for day mode, press
menu button. To program for night mode, press
DAY
menu button. When the display shows ENTER STATION EXTENSION,
NIGHT
do the following:
Enter a station extension using one of the methods described in
1.)
52.36.
The display shows the extension number and a Yes/No prompt. Press
2.)
the menu button, followed by
YES
press or the
2
the list.
When the display returns to ENTER STATION EXTENSION, select another
3.)
extension number. Or, if finished programming the station list, press
to continue.
ACCEPT
Ring-In For Day Or Night Mode: To program the station that will have ring in
for this trunk group for day mode, press
program for night mode, press
display shows ENTER STATION EXTENSION, enter stations into the list one at
a time as described above for Answer Access.
Toll Restriction: To program the toll restrictions for the trunk group, press
the
TOLL RESTRICTION
RESTRICTION OPTION, press the numbers that correspond to the toll restric-
tions you want to program, as follows:
COS for day or night mode: To program the toll restriction class of service
1.)
for day mode, press
service for night mode, press
play shows SET DAY (or NIGHT) COS XX. If this is not the COS you want
to program, scroll to the correct COS by pressing the high end of the Volume
button or the
NEXT
the Volume button or the
default COS numbers are listed below. (See
01 is not used for trunks.) When the correct COS is displayed, press
the menu button to enable the toll restriction. Or, press
ON
menu button to disable it. If desired, repeat this step to program additional
COS toll restrictions. Then press
or the
TRUNK GROUP
2
, to include the station in the list. Or,
#
menu button, followed by
NO
or the
3
or the
RING-IN NIGHT
4
menu button. When the display shows TOLL
or the
COS DAY
1
or the
COS NIGHT
2
menu button to scroll forward, or press the low end of
menu button to scroll backward. The
PREVIOUS
or
ACCEPT
#
menu button. Then
or the
ANS-ACCESS
1
or the
ANS-ACCESS
2
paragraph
, to exclude the station from
#
menu button. To
RING-IN DAY
menu button. When the
menu button. To program class of
menu button. The dis-
page 5-103 for definitions. COS
or the
2
to continue.
Trunk Groups
or
1
or
#
or
5
or
1
OFF