Inter-Tel AXXESS Manual page 701

B. STATION-TO-STATION CALLING
Receiving Intercom Calls
22.9 To receive an intercom call:
•
Inter-Tel Phone:
—
—
•
Executive Display, Professional Display, or Model 8560 Phones: Instead of answer-
ing the call, you may press one of the following menu buttons:
—
—
22.10 To receive an intercom call on a single-line set:
When you hear repeating double tones, lift the handset.
22.11 To receive a transferred-to-hold intercom call:
NOTE:
CALL button.
•
Inter-Tel Phone: When the
play shows (calling station) TFR FROM (transferring station), lift the handset and
press the
(or CALL button) to speak handsfree. You are connected to the caller. (Phones with
menu buttons have the same menu button options as described for a ringing intercom
call.)
•
Single-Line Set: When you hear a page announcing that a call is holding at your sta-
tion, lift the handset (at your station) and enter the Individual Hold feature code (336).
You are connected to the caller.
Station-To-Station Calling
®
INTER-TEL AXXESS
If you hear a double tone and a call announcement (handsfree call), and the
Speaker button is lit, respond handsfree or lift the handset. Display phones show
TO (username) to identify the source of the call.
IC
If you hear repeating double tones (private call), lift the handset, or press the
Speaker, , or
ANSWER IC
INTERCOM CALL FROM (username) to identify the source of the call.
SEND TO V-MAIL: Appears only if you have a voice mailbox. Pressing this but-
ton sends the call directly to your mailbox greeting.
IC CALL TO DND: Sends do-not-disturb tones to the caller and allows you to
program a do-not-disturb message. If using a display phone, the caller will see
DO-NOT-DISTURB. (See page 5-257
Disturb.)
If the station does not have an
IC
button (or CALL button). Or, while on hook, press the
IC
®
MANUAL VERSION 11.0 – May 2008
button to respond handsfree. Display phones show
for detailed instructions on using Do-Not-
button, the call will appear under a
IC
button (or CALL button) is fluttering and the dis-
System Features
button
IC
Page 5-175
5