Inter-Tel AXXESS Manual page 56

Hide thumbs Also See for AXXESS:

Table of Contents

11. SOFTWARE CONFIGURATIONS

A. SOFTWARE PART NUMBERS

11.1 The Inter-Tel system is available in a variety of software configurations with and with-

out networking capabilities. The part number for the software is as follows:

B. SOFTWARE LICENSES

11.2 Versions 8.0 and later software controls the device capacity and feature availability of

the system through a software license.

11.3 Call Processing Software Licenses: All Call Processing Cards (CPCs) and v8.0 (and

later) installations require a software license, which differs based on the CPU type, as

described below.

11.4 To run version 8.0 or later on a 64, 128, or 256 system, you must use the new CPC. The

CPU64, CPU128, and CPU256 cards do not support the new Call Processing license feature

and, therefore, do not support version 8.0 or later software.

MANUAL VERSION 11.0 – May 2008

Version 11.0 System Software CD-ROM (contains all software)

Axxess Software Upgrade v10.x to v11.0

A CPC-Single (64) or CPC-Dual (128 or 256) requires a single software license.

A 512-CPU, 1024-CPU (CPU/PCM-F), or CPU-ATM (PCM-A) system requires a Call

Processing (CP) Server that has a special security key (part no. 827.9775) that supports

the software license functionality. The software license is stored on the CP Server PC

and works only with the individual special security key.

Version 8.0 and later does not require feature PALs. In addition, because ver-

sion 8.0 no longer detects PALs, you do not need to upgrade the ATM or PCM-F PALs.

Software Configurations

Chapters

Table of Contents