Inter-Tel AXXESS Manual page 689

17.17 In the example above, the digit translations could be nodes that lead to various other
language-specific applications. Or, the first level can give more choices, such as American
English voice mail or automated attendant and Japanese voice mail and automated attendant.
Either way, the individual applications or nodes can be programmed to play only one language,
or they can use the device's language, as needed.
17.18 Multi-Language Feature on Network Operation: All nodes does not have to match
the languages because the voice processing system installs any existing language prompt, not
just the languages designated as primary or secondary. Therefore, for calls across network
nodes, if the language does not match between the two nodes, the called voice processing sys-
tem searches for the designated language in its system in the following order; Primary lan-
guage, Secondary language, American English, British English, Japanese, and Spanish
(Mexico City Spanish Dialect for VPU and EVMC, American Spanish Dialect for EM) and
uses the designated language. If the designated language does not exist in the voice processing
system, the system uses the default primary language instead.
E. DIRECTORIES
17.19 If Multilingual Support is enabled, directory users will be able to enter English/Spanish
and Japanese (Katakana) characters, as needed. Procedures for using the directories are given
on page
17.20 In directories, the English/Spanish characters are alphabetized before the Japanese char-
acters. Therefore, Japanese names will be at the end of the list, after the English/Spanish
names.
F. CHANGE LANGUAGE FEATURE CODE
17.21 A station user can change the assigned language for the station by entering the Change
Language feature code only when the station is idle.
17.22 To change the station's language:
Inter-Tel Phone: Enter the Change Language feature code (301) to change your station
between the programmed primary and secondary languages, as desired. The display
changes to the current language.
Single-Line Set: Lift the handset and enter the Change Language feature code (301) to
change your station between the primary and secondary languages, as desired. (To ver-
ify the current language, you can call a Voice Processing application that does not over-
ride the device language.)
17.23 A phone user can assign the Change Language feature code to any user-programmable
button.
17.24 Changing a phone's language automatically changes any display. For example, if a sta-
tion changes from the primary language to the secondary language while in do-not-disturb
mode with message 02, the display would change from primary language message 02 to sec-
ondary language message 02.
NOTE:
Model 8520, and Model 8560 Phones can be used for viewing Japanese displays. Other
phones do not support Japanese displays.
Directories
INTER-TEL
5-241.
Only Executive Display, Professional Display, Standard Display, Associate Display,
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
System Features
Page 5-163
5