Inter-Tel AXXESS Manual page 654

System Features
® ®
INTER-TEL AXXESS
B. LIQUID CRYSTAL DISPLAY (LCD)
Menu Keys
12.24 Some phones have feature-related menus that change with the function being performed
by the phone (intercom call, outside call, programming, etc.). These lines have menu selection
keys next to them or below them, that are used for menu features.
12.25 All Executive Display, Professional Display, and Model 8560 Phones have a six-line
display. Each line has 16 characters. (Illustrations of the Executive Display Phone, Professional
Display Phone, and Model 8560 displays are shown on the following page.) The top two lines
are for standard call information and show the same displays as other display phones. The
remaining four lines are used for displaying menu options. These lines have menu selection
buttons on both sides (eight buttons) that are used for menu features. When there are two
prompts on a line, like PREVIOUS and NEXT, the button next to the word is the one that will
select that feature. When there is only one prompt on a line, like DO NOT DISTURB, then
pressing the button on either side of the prompt will select it.
12.26 There is a system-wide flag, called
"Alternate Keyset Menu Displays," that
determines the display that Executive Dis-
play, Professional Display, and Model 8560
Phone users will see during an outside call.
In the default state, the display shows the
menu (shown right) with Transfer-To-Hold
on the first menu and Flash (Recall) on the
"More..." menu.
12.27 If the Alternate Keyset Menu Dis-
plays flag is enabled, the Executive Display,
Professional Display, and Model 8560
Phone users will see the menu with Flash or
Recall (shown right) on the first menu and
Transfer-To-Hold in the "More..." menu.
NOTE:
tons on the Model 8560.
12.28 Enabling the Alternate Keyset Menu flag allows Centrex (STAR) features to be
accessed more easily, using the
Page 5-128
MANUAL VERSION 11.0 – May 2008
Version 7.0 or later system software is required to support the menu display and but-
FLASH
HOLD
TRANSFER
TRANSFER-TO-HOLD
MUTE
HOLD
TRANSFER
FLASH/RECALL
MUTE
( ) menu option.
RECALL
Liquid Crystal Display (LCD)
SYS HOLD
CNF
MORE...
SYS HOLD
CNF
MORE...