Inter-Tel AXXESS Manual page 542

System Features
® ®
INTER-TEL AXXESS
Table 5-2. Station Feature Codes (Continued)
Feature Name
Barge-In
CO Hookflash (Recall)
Call Forward All Calls
Call Forward If Busy
Call Forward If No Answer
Call Forward If No Answer/Busy
Call Logging
Change Language
Conference
Data
Default Station
Directory
Page 5-16
MANUAL VERSION 11.0 – May 2008
U.S. [Europe]
Code
386
330
355
357
356
358
333
301
5
340
394
307
Definition
Accessed as an option from the Station Monitor feature
(321) the Barge-In feature allows the supervisor to
barge-in on a call to help the hunt group member/agent.
Sends a timed hookflash (recall) over the trunk while on
an outside call (includes conference calls).
Immediately forwards all calls to another station or to an
outside telephone number. (Inter-Tel phones use the
FWD button.)
Immediately forwards all calls to another station or to an
outside telephone number when the station is in use.
Forwards all calls to another station or to an outside tele-
phone number if not answered within a predetermined
time.
Forwards all calls to another station or to an outside tele-
phone number if not answered within a predetermined
amount of time or immediately if the station is in use.
Allows digital/IP endpoints and IP softphone users to
view the missed, received, and dialed call logs on their
endpoint. If the endpoint does not support Call Logging
or if the Enable Call Logging flag is not enabled, when
the user enters this feature code the endpoint displays
an error message and receives a corresponding error
tone. Non-display endpoints only receive the error tone.
See page 5-180 for details.
A station user can change the assigned language for the
station by entering the Change Language feature code
while the station is idle.
Connects from three to four parties in a conference. A
conference consists of any combination of inside and
outside parties. (Inter-Tel phones use the CNF button.)
(Inter-Tel Phones Only) Allows operation of a data device
attached to a phone that has a PC Data Port Module and
a Modem Data Port Module (also requires a modem-
equipped data device). (Analog phones have a default
DATA button.)
This single feature code cancels account codes for all
calls following, do-not-disturb, manual call forwarding,
background music, ring intercom always, and queue
requests; restores handsfree mode, pages, hunt group
calls, and system forwarding; and returns phone volumes
to default values.
(Display Phones Only) Allows display phone users to
search for extension numbers or system speed-dial num-
bers. The number can then be dialed, if desired. This
feature requires the Directories software license.
Station Feature Codes