Changing Information Displays In The Programming Window - Inter-Tel AXXESS Manual

Hide thumbs Also See for AXXESS:

Table of Contents

MANUAL VERSION 11.0 – May 2008

CHANGING INFORMATION DISPLAYS IN THE PROGRAMMING WINDOW

10.17 You can add information to the left side of the programming window to make items eas-

ier to identify. You do this by opening the folder to which you want to add information. For

example, look at System - Devices - Stations, as shown below. Each Node has a Description,

Username, and Node Number that are not displayed on the left side of the screen.

10.18 To add the information, right-click on the field you want displayed. For example, right-

click on the Description field, if you want it to appear with nodes on the left.

RIGHT-CLICK HERE

TO ADD DESCRIPTION

10.19 You will see an option to add the field to the folder name. Select that option and the

field will appear in the folder name at left, as shown in the example below. To remove the

field, repeat the procedure and select the option to remove the field. (When adding fields to the

folder name, the recommended limit is three fields.)

APPEARS HERE

Changing Information Displays in the Programming Window

Table of Contents