Inter-Tel AXXESS Manual page 825

52.43 To erase system speed-dial names or numbers:
While on hook, enter the Program System Speed-Dial feature code (9801). Display
1.
phones show PROGRAM SYS SPD # (000-999 or 0000-4999).
Enter the speed-dial location code (000-999 or 0000-4999). The display shows ENTER
2.
NAME: (current name).
You may erase the name and/or number:
3.
To erase the name: Press the
press
To erase the number: Press
then press the
Press
4.
play shows SYS SPD BIN #XXX UPDATED.
H. WORKING WITH THE MODEM
52.44 The Call Processing Card (CPC) has a built-in modem. This modem allows remote
users to access DB Programming. It also functions as a serial port, used for SMDR, Message
Print, etc. If necessary, System Administrators can enable, disable, or reset the modem and pro-
gram a DSS/BLF button to reflect the modem status. (For information about connecting to the
modem for DB Programming, see
Enabling/Disabling the Modem
52.45 To enable/disable a modem:
Enter the Modem Enable (9866) or Modem Disable (9867) feature code. The display
1.
shows ENABLE (DISABLE) MODEM EXT #.
Enter the extension of the modem (local or off-node) to enable/disable. The display
2.
shows MODEM ENABLED (DISABLED).
52.46 If disabled, the modem is placed into DND. In the disabled state, the modem rejects all
calls and does not allow camp ons.
NOTE:
EXTENSION.
Working with the Modem
INTER-TEL
.
CLEAR
#
button repeatedly until the number is erased or press
MUTE
or to exit. You hear a single progress tone when accepted. Your dis-
ACCEPT
#
page
If an invalid modem extension is entered, the display shows INVALID MODEM
® ®
AXXESS MANUAL VERSION 11.0 – May 2008
button repeatedly until the name is erased or
MUTE
or to display the ENTER NUMBER prompt,
ACCEPT
2-100.)
System Features
.
CLEAR
Page 5-299
5