Begin; Aaa Authentication - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

aaa authentication

Use the aaa authentication command to control various features of the AAA subsystem authentication
process. For more detailed information on AAA functionality, refer to the Technology Review section of
the command aaa on on page 321.Variations of this command include:
aaa authentication banner <banner>
aaa authentication fail-message <message>
aaa authentication banner password-prompt <prompt>
aaa authentication banner username-prompt <prompt>
Syntax Description
banner <string>
fail-message <string>
password-prompt <string>
username-prompt <string>
Default Values
banner
fail-message
password-prompt
username-prompt
5991-2114
Sets the banner shown before user authentication is attempted. The
banner can be multiple lines. Enter a delimiter (such as :) to begin
recording the typed text message used for the banner. The message
must end with the same delimiter to indicate that the message is
complete. The text delimiters are not displayed to the screen during
operation.
Sets the message shown if user authentication fails. The message
can be multiple lines. Enter a delimiter (such as :) to begin recording
the typed text message displayed after a failed authentication
attempt. The message must end with the same delimiter to indicate
that the message is complete. The text delimiters are not displayed to
the screen during operation.
Sets the prompt for the user's password. The prompt is a single line.
Enclose the string in quotation marks.
Sets the prompt for the user's name. The prompt is a single line.
Enclose the string in quotation marks.
User Access Verification
Authentication Failed
Password:
Username:
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
310