HP ProCurve 7102dl Reference Manual page 274

SROS Command Line Interface Reference Guide
show sip location [dynamic | static]
Use the show sip location command to display Session Initiation Protocol (SIP) statistical and registration
information.
Syntax Description
dynamic
static
Default Values
No default necessary for this command.
Usage Examples
The following example shows sample output from the show sip location static command:
ProCurve>enable
ProCurve#show sip location static
User IP Address
----------------------------------------------------------------------------------------------
Test 10.1.1.1
5991-2114
Displays SIP location database dynamic entries.
Displays SIP location database static entries.
Port Expires
5060 0
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Source
User Config
Enable Mode Command Set
272