HP ProCurve 7102dl Reference Manual page 253

SROS Command Line Interface Reference Guide
show memory [heap | realtime]
Use the show memory command to display statistics regarding memory including memory allocation and
buffer use statistics. Shows how memory is in use (broken down by memory size) and how much memory
is free.
Syntax Description
heap
realtime
Default Values
No default value necessary for this command.
Functional Notes
Use the realtime argument for this command to display full-screen output in real-time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit reatime
mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the information
will truncate at the bottom of the screen. In order to maximize the amount of data displayed, increase the
terminal length (using the terminal length command; refer to
Usage Examples
The following example is a sample output from the show memory heap command:
ProCurve>enable
ProCurve#show memory heap
Memory Heap:
HeapFree: 2935792
HeapSize: 8522736
Block Managers:
Mgr Size Used
0 0 58
1 16 1263
2 48 1225
3 112 432
4 240 140
5 496 72
6 1008 76
7 2032 25
8 4080 2
9 8176 31
10 16368 8
5991-2114
Shows how much memory is in use (broken down by memory block size) and how
much memory is free.
Displays full-screen output in real-time. See the Functional Notes below for more
information.
Free Max-Used
0 58
10 1273
2 1227
2 434
3 143
2 74
1 26
1 26
1 3
1 32
0 8
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
terminal length <lines>
on page 294).
251