HP ProCurve 7102dl Reference Manual page 255

SROS Command Line Interface Reference Guide Enable Mode Command Set
show output-startup
Use the show output-startup command to display startup configuration output line-by-line. This output
can be copied into a text file and then used as a configuration editing tool.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from the show output-startup command:
ProCurve>enable
ProCurve#show output-startup
!
ProCurve#!
ProCurve#hostname "UNIT_2"
UNIT_2#no enable password
UNIT_2#!
UNIT_2#ip subnet-zero
UNIT_2#ip classless
UNIT_2#ip routing
UNIT_2#!
UNIT_2#event-history on
UNIT_2#no logging forwarding
UNIT_2#logging forwarding priority-level info
UNIT_2#no logging email
etc....
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 253