HP ProCurve 7102dl Reference Manual page 51
Secure router sros command line interface
Hide thumbs
Also See for ProCurve 7102dl:
- Configuration manual (1114 pages) ,
- Product end-of-life disassembly instructions (2 pages) ,
- Advanced management and configuration manual (1005 pages)
Table of Contents
Advertisement
SROS Command Line Interface Reference Guide
clear lldp counters interface <interface>
Use the clear lldp counters interface command to reset all LLDP packet counters to 0 for a specified
interface.
Syntax Description
<interface>
Default Values
No default values are necessary for this command.
Usage Examples
The following example resets the counters on a PPP interface:
ProCurve>enable
ProCurve#clear lldp counters interface ppp 1
5991-2114
Clears the information for the specified interface. Type clear lldp counters
interface ? for a complete list of applicable interfaces.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
49
Advertisement
Chapters
Table of Contents
