HP ProCurve 7102dl Reference Manual page 827

SROS Command Line Interface Reference Guide
connect-sequence
Use the connect-sequence command to provide instructions to the interface on how to use the resource
pool and telephone numbers to connect to demand destinations. Use the no form of this command to
restore the default values.Variations of this command include the following:
connect-sequence <sequence number> dial-string <string> forced-analog
connect-sequence <sequence number> dial-string <string> forced-analog busyout-threshold <value>
connect-sequence <sequence number> dial-string <string> forced-isdn-56k
connect-sequence <sequence number> dial-string <string> forced-isdn-56k
busyout-threshold <value>
connect-sequence <sequence number> dial-string <string> forced-isdn-64k
connect-sequence <sequence number> dial-string <string> forced-isdn-64k
busyout-threshold <value>
connect-sequence <sequence number> dial-string <string> isdn-56k
connect-sequence <sequence number> dial-string <string> isdn-56k busyout-threshold <value>
connect-sequence <sequence number> dial-string <string> isdn-64k
connect-sequence <sequence number> dial-string <string> isdn-64k busyout-threshold <value>
Syntax Description
<sequence number>
<string>
forced-analog
forced-isdn-56k
forced-isdn-64k
isdn-56k
isdn-64k
busyout-threshold <value>
Default Values
By default any dial resource may be used.
Usage Examples
The following example instructs demand interface 1 to place the call using ISDN 64k:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#connect-sequence 65 dial-string 9165551212 forced-isdn-64k
5991-2114
Specifies the number for this connection specification entry. Range: 1 to
65,535.
Specifies the telephone number to dial when using this connection. The
dial string is limited to 20 digits.
Specifies that only analog resources may be used.
Specifies that only ISDN resources may be used. Call is placed using
ISDN 56k.
Specifies that only ISDN resources may be used. Call is placed using
ISDN 64k.
Specifies any dial resource may be used if ISDN 56k call-type is used.
Specifies any dial resource may be used if ISDN 64k call-type is used.
Optional. Specifies the maximum number of connect sequence cycles
during an activation attempt that must fail before it is skipped until the
next activation attempt.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
825