SROS Command Line Interface Reference Guide
HDLC Command Set
backup auto-restore
Use the backup auto-restore command to configure the interface to automatically discontinue backup
when all network conditions are operational. Use the no form of this command to disable the auto-restore
feature.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically restore the primary connection when the failure
condition clears.
Usage Examples
The following configures the SROS to automatically restore the primary connection when the failure
condition clears:
ProCurve(config)#interface hdlc 1
ProCurve(config-hdlc 1)#backup auto-restore
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
974